Dreaming about 3D printing your own clay models but not sure how to start?

Planning to teach your students 3D printing with sustainable materials? 

Check WASP Clay printers family and find the best machine for your needs. Äerd Lab will answer all your questions concerning hardware and software, will accompany you through the ordering process right up to the setting of the printer and will be your contact in case of problems or doubts.

Delta WASP 2040 Clay

The clay 3D printer. Our Delta WASP 2040 Clay is  the ideal equipment for clay printing. Accurate and fast using all ceramic materials. Clay 3D printer open and accessible on three sides to interact during the prints. Compact professional clay 3D printer, prints up to 40 cm in height. Made in Italy delta 3D printer, with a clean design and compact dimensions. The aluminum and steel structure guarantees stability and precision, obtaining quality prints with dense fluid materials.

TECHNICAL INNOVATIONS

• Extruder with controlled dosage thanks to a screw
• Controlled air pressure on the printer
• Perfect stability thanks to new sliding-system on bearings
• Dedicated Firmware
• Air pipe connection integrated into the printer

TECHNICAL FEATURES

Printing volume Ø 200mm x h 400 mm;
Minimum layer height 0,5 mm;
Maximum print speed 150 mm/s;
Maximum travel speed 150 mm/s;
Acceleration 500 mm/s2;

MATERIALS

Material porcelain, earthenware, gres, clay etc

CONFIGURABLE TOOLS

LDM WASP extruder with 1.2 mm, 2 mm nozzle (standard)

SOFTWARE

Operative systems WIndows, Mac, Linux;
Slicing software compatible with all slicing software (Cura – SLic3r – Simplify3D®);
File type .stl, .obj, .gcode;

INTERFACE

SD Card
LCD Screen

PHYSICAL DIMENSIONS

Dimensions 44 cm x 49 cm x h 87 cm
Machine weight 40 kg
Dimensions and weight for the cardboard packaging on pallet 50 cm x 58 cm x 101 cm, weight 50 kg

SUPPLY

Input 220/240 V 50/60 Hz (110 V available)
Absorbed power 180 W
N.B. air compressor needed (min. pressure 8 bar)

TEMPERATURE

Use 20-30 C°;
Warehouse 0-30 C°;

MECHANICS

Frames and carters metal sheet (lowers the machine vibrations, grants the best print quality), aluminum, painted steel
Print bed bed in wooden multi-layer
Movements guides on anodized aluminum, open sides give the possibility to stop the printer and interact with the part during the print

EXTRA

RESURRECTION SYSTEM
A system which allow users to save their print job and resume it in the case of power failure.

FREE Z-SYSTEM
The machine measures the height of interruption of the print and it restarts there.  

INCLUDED

• 1 LDM Wasp extruder with stainless steel nozzle set diam. 1.5, 2, 3 mm
• 1 3L tank
• 1 printing plate in Marine Multilayer
• 12 kg of red earthenware (clay mixture)

Dimensions and weight for the cardboard packaging on pallet 50 cm x 58 cm x 101 cm, weight 50 kg NB. The air compressor and the pipe that connects it to the 3D printer are not supplied by WASP.  A useful tip: It’s a nylon pipe and it’s a tool generally supplied by the air compressor supplier. If you don’t have it you can buy it from any hardware store of the length you need, ask for an 8 mm (external dimension) nylon pipe.

from 3300 EUR + VAT / free delivery

should you have any questions, feel free to contact me:

ciao@aerdlab.com

Delta WASP 40100 Clay

Accurate and fast with all ceramic materials. Ceramic 3D printer open and accessible on three sides to interact during prints. With Delta WASP 40100 clay is possible to print directly on the floor or on a printing surface removable steel. You can also continue printing without waiting for the workpiece to dry by simply moving the printer. LDM WASP Extruder XL 3.0 compatible, extruder ideal for fast and large prints.

PRINTER DETAILS

Print volume: Ø 400mm x h 1000 mm; (h 450 mm with intermediate plate)
Minimum layer height: 0.5 mm
Maximum print speed: 150 mm/s
Maximum traversing speed: 150 mm/s
Acceleration: 500 mm/s2

MATERIAL

Material: Porcelain, earthenware, gres, refractory materials, clay etc.

EXTRUDER CORES

LDM WASP extruder: 1.5, 2, 3 mm nozzle diameter (standard)
LDM WASP extruder XL: 4 mm, 6 mm, 8 mm nozzle diameter

HIGHLIGHTS

• LDM clay extruder compatible
• Removable map
• New 32 bit map x4 performance
• Free zeta system (cc)
• Resurrection system (cc)
• Higher temperature
• Wifi module for remote control
• Adjustable Zero Play Scroll

SOFTWARE

Operating systems: Windows, Mac, Linux;
Slicing software: compatible with all slicing software (Cura - SLic3r - Simplify3D®);
File type: .stl, .obj, .gcode;

INTERFACE

SD card
LCD screen

PHYSICAL DIMENSIONS

Dimensions: 77 cm x 85 cm x h 195 cm (h 270 cm with tank holder)
Weight of the machine: 80 kg
Dimensions for shipping the machine with wooden packaging: 100 cm x 100 cm x 230 cm, weight 130 kg

POWER SUPPLY

Input: 220/240 V 50/60 Hz (110 V available)
Absorbed power: 200 W
N.B.: Air compressor required (min. pressure 8 bar)

TEMPERATURE

Use 20-30 C°
Storage 0-30 C°

MECHANICS

Frame and support: metal sheet (reduces machine vibrations, guarantees the best print quality), aluminium, painted steel
Print bed: bed made of multilayer wood
Movements: Guides on anodised aluminium
Open sides give the possibility to stop the printer and interact with the part during printing

PRODUCT PACKAGE INCLUDES

• 1 LDM WASP extruder 3.0 with nozzle in stainless steel diam. 1,5, 2, 3 mm.
• 1 tank 5L
• 1 pressure bed in marine plywood
• 10 kg red stoneware

Note: The air compressor and the pipe connecting it to the 3D printer are not supplied by WASP.

A useful tip: It is a nylon tube that is usually supplied by the air compressor supplier. If you don't have it, you can buy it at any hardware store in the length you need, ask for an 8mm (outside dimension) nylon tube.

EXTRA RECOVERY SYSTEM

A system that allows the user to save their print job and resume it in the event of a power failure.

FREE Z-SYSTEM

The machine measures the level of interruption of the print and resumes there.

TECHNICAL INNOVATIONS

• No print stop: you can move the printer without removing the object - every time the print is finished (this avoids having to wait for the object to dry)
• Print from the floor or from 2 print beds at different heights
• Extruder with controlled dosing thanks to a screw (2013)
• Controlled air pressure on the printer
• Perfect stability thanks to a new sliding system with bearings

 

from 7590 EUR + VAT / free delivery

should you have any questions, feel free to contact me:

ciao@aerdlab.com